DJROLL Handheld Bidet Sprayer for Toilet, Spray Attachment with Hose for Feminine Wash, Baby Cloth Diaper Washer, Stainless Steel Cleaner and Shower Sprayer for Pet, Bathroom or Toilet   Import  Single ASIN  Import  Multiple ASIN ×Product customi

Warm Tips:Make sure that your toilet tank's water inlet diameter is 1/2" for this set to be installed.We suggest you to turn off the water supply to the sprayer when it is not in use to prolong the lifespan of the sprayer and also to avoid any unwanted accidents.If are not able to do that, adjust the water supply using the T-valve included to a low level (suitable for use as a handheld bidet) so that the water pressure on the hose and sprayer is not that high.How to use?Step 1: Turn Off the Water Supply.Turn off the water supply valve at the wall next to your toilet. Twist it clockwise as far as it will go. Flush the toilet and hold down the handle to completely empty the toilet tank.Step 2: Make sure there is a rubber washer inside both the female ends.Confirm that the flat rubber washer is inside the top of your bidet's T-valve (hint: the top of the T-valve is where the spinning nut is located), and it is pushed all the way down to tighten the connection.Step 3: Connect the T-Valve and the Hoses Screw the top of the T-valve onto the toilet's fill valve where you just unscrewed the water supply hose. Be careful not to over-tighten the connections. Screw the toilet's water supply hose to the bottom of the T-valve. Connect one end of the handheld bidet hose to the side of the T-valve. Screw the bidet sprayer head onto the other end of the bidet hose.Step 4: Turn On the Water Supply & Mount the SprayerTurn the water supply valve back on. If you notice that any connection is loose or leaking, you may need to add some plumber's tape. If you're leak-free, your hand-held bidet sprayer is installed and ready for use!Toilet Mount: Screw the holder onto the toilet tank clip. Lift up the toilet tank lid, slide the clip onto the side of the tank, and replace the lid.Wall Mount: Use the drywall screws and anchors to attach the holder to the wall.

• 【strong water stream】 Control the water pressure for a gentle and thorough clean up. In the Jet spray mode, you will be getting a strong water stream that will be great for cleaning the toilet or potty too!
• 【Leak-Proof & High Quality】The hose features double protection with a stainless steel casing and an EPDM inner tube (better than PVC), to get rid of leak problems, higher quality and durability, advanced wire drawing process on the surface, good oxidation resistance, exquisite workmanship. You don’t need to worry about scratch, corrosion, leaking.
• 【Easy and Quick Installation】Comes with the installation kit so you don't have to buy anything else. You will spend about 10 minutes to install this toilet handheld bidet shower kit without plumping help. Bathroom bidet sprayer has two ways of installation, can be mounted on the wall or toilet tank, easy to install, no plumbers required. (All you have to do is to pay attention and make sure that your toilet tank's water inlet diameter is 1/2"）
• 【Eco-friendly Cleaning Options】Papers come from trees. Not to mention the trees that were cut down and the water utilized to produce the toilet paper. Now a hand held bidet sprayer prevents all of this. It is very convenient for all kinds of washing activities which includes bathing your pet, washing, cleaning diapers etc.
• 【Satisfied service】As a responsible and reliable seller on Amazon, we give priority to our customers' shopping experience. Back up with 24h/7 day customer support. If for any reason you are not satisfy with the hand held bidet sprayer, please email us and let us know.

› See more product details